Configuring the WAP4410N Wireless-N Access Point
Configuring Status Settings
STEP 1
STEP 2
WAP4410N Wireless-N Access Point with Power Over Internet
To check local network status, follow these steps:
Click Status > Local Network.
This page displays the status information of your access point:
•
Information
-
Hardware Version—The version of the access point's current hardware.
-
Software Version—The version of the access point's current software.
-
Local MAC Address—The MAC address of the access point's local
network interface.
-
System Up Time—The length of time the access point has been running
for.
•
Local Network
-
IP Address—The access point's IP address as it appears on your local
network.
-
Subnet Mask—The access point's subnet mask.
To update the status information, click Refresh.
6
62