Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 39

Configuring the WAP4410N Wireless-N Access Point
Wireless
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet
Configuring WAP2-Personal Security
This security mode supports the WPA2-Personal protocol.
To enable wireless WPA2-Personal security, follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WAP2-Personal.
To enable wireless isolation within the SSID, click Enabled.
Provide the following information:
•
WPA Algorithms—(Read-only) WPA2-Personal automatically chooses AES
for data encryption.
•
Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.
•
Key Renewal—Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
Click Save.
6
30