Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 43

Configuring the WAP4410N Wireless-N Access Point
Wireless
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Enterprise.
To enable wireless isolation within the SSID, click Enabled.
Provide the following information:
•
Primary/Backup RADIUS Server—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
•
Primary/Backup RADIUS Server Port—Enter the port number used by the
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.
•
Primary/Backup Shared Secret—Enter the Shared Secret key used by the
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.
•
WPA Algorithms—WPA2 always uses AES for data encryption.
•
Key Renewal Timeout—Enter a key renewal timeout period, which
instructs the access point how often it should change the encryption keys.
The default is 3600 seconds.
Click Save.
6
34