Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 37

Configuring the WAP4410N Wireless-N Access Point
Wireless
STEP 4
STEP 5
STEP 6
WAP4410N Wireless-N Access Point with Power Over Internet
To enable wireless security, from the Security Mode drop-down menu, select one
of the following security modes and provide the required information, as
described in the sections below.
•
WPA-Personal
•
WPA2-Personal
•
WPA2-Personal Mixed
•
WPA-Enterprise
•
WPA2-Enterprise
•
WPA2-Enterprise Mixed
•
Radius
•
WEP
To prevent wireless computers associated to the same SSID from seeing and
transferring files between each other, in the Wireless Isolation (within SSID) field,
click Enabled.
This feature is very useful when setting up a wireless hotspot location. The default
is Disabled.
Click Save.
6
28