Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 47

Configuring the WAP4410N Wireless-N Access Point
Wireless
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet
Provide the following information:
•
Primary/Backup RADIUS Server—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
•
Primary/Backup RADIUS Server Port—Enter the port number used by the
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.
•
Primary/Backup Shared Secret—Enter the Shared Secret key used by the
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.
Click Save.
Configuring WEP Security
This security mode is defined in the original IEEE 802. 1 1. This mode is not
recommended now due to its weak security protection. For better security,
migrate to WPA or WPA2.
6
38