Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 38

Configuring the WAP4410N Wireless-N Access Point
Wireless
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WAP4410N Wireless-N Access Point with Power Over Internet
Configuring WAP-Personal Security
Wi-Fi Protected Access (WPA) Personal (WAP-Personal) is a security standard
stronger than WEP encryption and forward compatible with IEEE 802. 1 1e. WPA-
Personal is also known as WAP-PSK.
To enable wireless WPA-Personal security, follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WAP-Personal.
To enable wireless isolation within the SSID, click Enabled.
Provide the following information:
•
WPA Algorithms—WPA offers you two encryption methods, TKIP and AES
for data encryption. Select the type of algorithm you want to use, TKIP or
AES. The default is TKIP.
•
Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.
•
Key Renewal— Enter a key renewal timeout period, which instructs the
access point how often it should change the encryption keys. The default is
3600 seconds.
Click Save.
6
29