Administration - Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual

Configuring the WAP4410N Wireless-N Access Point

Administration

STEP 3
Administration
WAP4410N Wireless-N Access Point with Power Over Internet
•
Wireless Monitor—Allows the access point to detect unauthorized (rogue)
access points on your network.
-
No Security—Check this check box to identify any access point
operating with security disabled as a rogue access point.
-
Not in Legal AP List—Check this check box to flag any access point not
listed in the Legal AP List as a rouge access point. If you check this
check box, you must maintain the Legal AP List.
-
Define Legal AP—Click this button to open a sub-screen where you can
modify the Legal AP List. This list must contain all known access points.
You must keep this list up to date.
Click Save.
This section describes how to configure the administration settings of the access
point:
•
"Configuring Administration Settings" on page 52
•
"Configuring Administration Log" on page 54
•
"Diagnosing Access Point Problems" on page 56
•
"Restoring Factory Default Settings" on page 57
•
"Upgrading the Firmware" on page 58
•
"Rebooting the Access Point" on page 59
•
"Upgrading the Firmware" on page 58
6
51