Flush Mount Surface Mounting Kit - DKS 1803PC Owner's Manual

1.1.6 Flush Mount Surface Mounting Kit

Flush mount units can be surface mounted by using the optional 1814-152 surface mount trim ring.
Flush mount units are not designed for direct exposure to the weather. Be sure that the unit is
securely mounted and is not subject to vibration from closing doors or gates.
CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the
entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or
in such a way that a person cannot operate the entry system and touch the gate or gate operator at
the same time.
1.0
.375
1.125 DIA
12.0
9.0
7.5
6.0
3.0
1.125 SQ
15
2.625
1814-152 Flush Mount
Trim Ring Entry System