Clearing Lcd Error Messages - Muratec F-112P User Manual

Display
Cancel ?
1:Yes 2:No
[Comm. Error]
CRU Fuse Error
[Document Jam]
[Door Open]
Group Not Available
9.8
T
ROUBLESHOOTING

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to
indicate the machine's status or errors. Refer to the following
table to understand the message's meaning and correct the
problem, if necessary. Messages and their meanings are listed
in alphabetical order.
Meaning
Your machine's memory has
become full while
documents were being
loaded into memory.
The machine has a
communication problem.
The machine has a problem
with recognizing the new
toner cartridge.
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
The front or rear cover is not
securely latched.
You have tried to select a
group location number
where only a single location
number can be used, such
as when adding locations for
a broadcasting operation.
Suggested solutions
To cancel the fax job, press the
No 1 button "Yes."
If you want to send the pages
already stored, press the No 2
button "No." You should send
the remaining pages later when
the memory is available.
Ask the sender to try again.
Please contact a service
representative.
Clear the document jam. See
page 9.2.
Close the cover until it locks into
place.
Just use a one-touch or speed
dial number or dial a number
manually using the number
keypad.