Receiving A Fax; About Receiving Modes - Muratec F-112P User Manual

Receiving a Fax

6.10
F
AXING

About Receiving Modes

• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by picking up the handset
or pressing On Hook Dial (you can hear voice or fax tone
from the remote machine) and then pressing Start Copy/
Fax on the control panel of your machine. You can also pick
up the handset of the extension phone and then press the
remote receive code; see page 6.13.
• In Ans/Fax mode, the answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
• In DRPD mode, you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. "Distinctive Ring" is a
telephone company service which enables a user to use a single
telephone line to answer several different telephone numbers.
For further details. See page 6.13
The current receiving mode displays when the machine is in
Standby mode.
When the memory is full, the receiving mode automatically
switches to Tel.
N
:
OTES
• To use Ans/Fax mode, connect an answering machine to the
EXT jack on the back of your machine. see page 1.15.
• If you do not want other people to view your received
documents, you can use Secure Receiving mode. In this mode,
all of the received faxes are stored in the memory. For further
details, see page 6.29.