Setting The Time Out Option; Collation Copying - Muratec F-112P User Manual

4.8
C
OPYING

Setting the Time Out Option

You can set the time the machine waits before it restores the
default copy settings, if you do not start copying after changing
them on the control panel.
1
Press Menu on the control panel until "Copy Setup"
appears on the top line of the display.
2
Press the scroll button (
bottom line.
3
Press Enter to access the menu item.
4
Press the scroll button (
appears on the display.
You can select from 15, 30, 60 and 180 (seconds).
Selecting "Off" means that the machine does not restore
the default settings until you press Start Copy/Fax to
start copying, or Stop/Clear to cancel.
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.

Collation Copying

The Collation copying feature is available only when you load
documents in the ADF.
1
Press Menu on the control panel until "Copy Setup"
appears on the top line of the display.
2
Press the scroll button (
on the bottom line.
3
Press Enter to access the menu item.
4
If you are making multiple copies and want to collate them,
press the scroll button (
On and press Enter.
" "
1 1
2
3
Collated Copy On
5
Press Start Copy/Fax to begin copying.
or ) to display "Timeout" on the
or ) until the status you want
or ) to display "Copy Collated"
or ) to set Collated Copy to
1
2
1
3
Collated Copy Off
2 3
3
2