Replacing The Toner Cartridge - Muratec F-112P User Manual

Replacing the Toner Cartridge

When the toner eventually runs out, only blank pages print when a print
job is sent or when a fax is received. At this stage, the toner cartridge
needs to be replaced. The display on the control panel shows the
warning message, "Toner Empty" and the machine stops printing.
N
: You can set the machine to ignore the "Toner Empty"
OTE
message and continue printing. See page 8.11.
1
Open the front cover.
2
Lightly pushing the used cartridge down, pull it out.
3
Unpack the new toner cartridge and gently roll it
horizontally four or five times to distribute the toner evenly
inside the cartridge.
4
Slide the new toner cartridge in until it locks into place.
5
Close the front cover.
M 8.9
AINTENANCE
8