Changing the Default Settings
Copy options, including darkness, original type, copy size and
number of copies, can be set to the most frequently used
modes. When you copy a document, the default settings are
used unless they are changed by using the corresponding
buttons on the control panel.
To create your own default settings:
1
Press Menu on the control panel until "Copy Setup"
appears on the top line of the display.
The first menu item, "Default-Change", appears on the
bottom line.
2
Press Enter to access the menu item. The first setup
option, "Darkness," appears on the bottom line.
3
Press the scroll button (
options.
4
When the option you want to set appears, press Enter to
access the option.
5
Change the setting using the scroll button (
enter the value using the number keypad.
6
Press Enter to save the selection.
7
Repeat steps 3 through 6, as needed.
8
To return to Standby mode, press Stop/Clear.
N
: While you set copy options, pressing
OTE
the changed settings and restores their default status.
or
) to scroll through the setup
or
Stop/Clear cancels
C
4
) or
4.7
OPYING