Replacing The Adf Rubber Pad - Muratec F-112P User Manual

Replacing the ADF Rubber Pad

You can purchase a ADF rubber assembly from your Muratec
dealer.
1
Open the control panel by gripping it on the bottom edge
and pulling it.
2
Disconnect the support on the left side of the machine from
the control panel and lift the control panel up to the
complete open position.
3
Remove the control panel from the machine by
disconnecting the hinge on the right.
N
: Be careful not to disconnect the connector on the control
OTE
panel from the machine as it turns the LCD off.
M 8.13
AINTENANCE
8