NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 87

The Toolbar
Train OCR
Select Train OCR to create a character training file (*.trn) that assists
OmniPage during text recognition and allows better recognition of special
characters.
A character training file is a set of pre-recognized text characters that
OmniPage compares with the characters in the page image during
recognition. Before recognizing an image, you can create a new training
file or choose an existing one in the OCR settings panel.
For more information on creating a training file, see "Train OCR" on page
129.
Shortcut Command Buttons
The shortcut command buttons perform the same functions as the
commands of the same name in the File, Edit, Settings, and Help menus.
Settings Save Save As... Print Help
Panel
Cut
Copy Paste Clear All Find/ Check
Zones Replace Recognition
For example, you can click the Settings Panel button in the toolbar to open
the Settings Panel or you can choose Settings Panel... in the Settings menu.
See each button's respective menu entry further in this chapter for
information.
Some buttons are only active when the particular command it represents
can be applied to the active text or zone window. The Check Recognition
button, for example, is only active when the text window is active. There
are no Shortcut command buttons in Direct Input mode. See Chapter 5,
Direct Input, for detailed information.
Commands and Settings 87