NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 132

The character set you just trained is appended to the selected file.
A dialog box asks if you want to make this the current training
file and recognize your document.
• Click Yes to recognize your page image and apply the training
• Click No if you want to return to the OmniPage screen without
Save
1 Click Save to save the trained characters to a new file.
The Save dialog box appears.
2 Enter a name in the File Name text box.
3 Click OK.
Training files are saved by default to the omnipro\data
directory. This is the only place OmniPage looks for the files.
A dialog box asks if you want to make this the current training
file and recognize your document.
• Click Yes to recognize your page image and apply the training
• Click No if you want to return to the OmniPage screen without
See "Deleting *.set, *.trn, *.ud, *.zcn, and *.zon Files" on page 236 for
information on how to delete a training file.
Process Settings
Choose Process Settings to access the image, zone, and OCR processing
commands. You can also select these options in the Image, Zone, and OCR
button drop-down lists.
The Process Settings cascading menu contains the following commands:
• Scan Image or Load Image
• Auto Zones, Manual Zones, or Use Template...
• Perform OCR, Train OCR, or Defer OCR
file you just created.
recognizing the image.
file you just created.
recognizing the image.
The Process Menu
Commands and Settings 132