NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 224

4 Install OmniPage according to the instructions in Chapter 1,
Installation.
5 Reopen the Windows system.ini file and change the line
Shell=progman.exe back to Shell=ndw.exe.
This will make the Norton Desktop appear when you start
Windows.
6 Save the file.
7 Restart Windows.
Speeding Up Installation
OmniPage installation is faster if you use a disk-caching program. Load
SMARTDrive, the disk-caching program provided with Windows unless
your system uses a different disk-caching program. Refer to the
documentation that came with your system.
Conflicts with Disk-Caching Programs
Some disk-caching programs interfere with memory allocation and will
prevent you from installing successfully. If you are using a disk cache
program other than Windows SMARTDrive, temporarily disable it and
try to install OmniPage again. Then enable the cache program and verify
that it works.
Using EMM386.EXE
You may not be able to use this memory manager with OmniPage. Try
running OmniPage with just the default Windows memory management
programs. Consult your memory manager's documentation for
instructions on how to deinstall emm386.exe from your config.sys
file.
Setup Program Requests Same Disk
Eject the disk, exit the program and restart your computer if the Setup
program repeatedly requests the same installation disk. Try running Setup
again.
If this does not solve the problem and the correct disk is in the disk drive,
the disk may be damaged. To check the disk:
1 Exit the installation program and Windows.
2 From the DOS prompt, type dir B: (if you are installing from
drive A, type dir A:).
Installation
Technical Information 224