NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 143

Select Languages
Choose Select Languages... to select one or more language character sets for
text recognition.
OmniPage can recognize additional characters (such as circumflexes,
umlauts, etc.) unique to a particular language; thirteen languages are
available. You may select more than one language at a time, but for faster
recognition, use only the minimum number of languages that are
necessary.
Select the main dictionary that matches your language selection. Deselect
Use Language Analyst in the OCR settings panel and 3D OCR in the Scanner
settings panel if you do not have the appropriate dictionary. Select only
one language if you use the Language Analyst or 3D OCR.
Selecting a Language
1 Click once on a language to select it.
2 Select as many languages as you need.
Selected languages are highlighted.
To deselect a language, click it again.
3 Click OK.
Click Cancel to exit without setting the selected language(s).
Register Applications
Choose Register Applications... to select which of your applications will
support Direct Input or to remove an application from the Registered
Applications list.
Direct Input lets you launch OmniPage from a supported application and
place recognized text directly in your open application. (Do not confuse
this command with the Register menu that appears if you have not
registered OmniPage.) Two Windows applications, Write and Notepad,
are pre-registered.
See Chapter 5, Direct Input, for detailed information.
The Settings Menu
Commands and Settings 143