NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 117

The Process Menu
Auto
The Process menu lets you perform each step of the OCR process as well
as other OCR-related functions. Process menu commands include:
• Auto/Stop
• Scan Image/Load Image
• Auto Zones/Manual Zones/Use Template
• Perform OCR/Defer OCR/Train OCR
• Process Settings
• Finish Current Document
• Finish Deferred Documents
Some of the Process menu commands are available as buttons in the
toolbar. The Process Settings commands are available in the Image, Zone,
and OCR button drop-down lists. The Process Settings commands change
according to the currently selected button commands and vice versa.
See Chapter 5, Direct Input, for information on Process menu commands
that appear only in Direct Input mode.
Choose Auto to automatically start and finish processing each page of a
new document or finish processing the current page of an open document.
This command performs the same function as the AUTO button in the
toolbar.
Automatic processing of a document is determined by the currently
selected Process Setting commands. For example, if Scan Image, Auto Zones,
and Perform OCR are selected as the processing commands, the following
process occurs when you choose Auto:
1 OmniPage scans the page in your scanner and displays the image
in the zone window.
2 OmniPage creates zones on the page image according to the
zoning method selected in the Settings Panel.
3 OmniPage performs OCR on the page image and displays the
recognized text in the text window.
This same process repeats for every page in a multiple-page
document.
The Process Menu
Commands and Settings 117