NUANCE OMNIPAGE PRO 6 - REFERENCE MANUAL FOR WINDOWS Reference Manual page 121

1 Choose Auto in the Process Settings cascading menu.
The Load Image dialog box appears.
See the previous section for information on the dialog box buttons.
2 Select a file type in the List Files of Type drop-down list.
Files of that type appear under the File Name list box.
3 Select a file to load and click Add.
The file appears in the Selected Files list box. You can select up to
250 files.
4 Repeat for each file you want to load.
5 Click OK when you have selected all the files to load.
OmniPage loads, zones, and recognizes each file in the order it
was selected.
If you had selected a non-automatic processing option, such as
Manual Zones, you would draw zones and click AUTO to
proceed with OCR. OmniPage would then automatically open
the Load Image dialog box. Click OK to continue processing.
Adding a Page to a Loaded Image
A loaded image becomes your working document. If a document is
already open when you choose a file to load, the newly loaded image is
added to it.
• The new document automatically becomes page two of a one-page
document.
• The new document automatically is added to the last page of a
document if it is open to the last page.
The Process Menu
Commands and Settings 121