ScanSoft OMNIPAGE PRO 14 Manual page 87

If you later change the saving options for the simple HTML converter,
these changes will also be applied in the multiple converter.
To make an independent multiple converter, using the same example,
select the simple HTML converter and make a new simple converter
from it, naming it for instance 'HTML for multiple'. Similarly, make a
converter 'WordPad for multiple'. Then make a new multiple converter
from the two user-defined simple converters. In this way, the settings for
simple saving to HTML will be independent from those in the multiple
converter.
You can save pages with different formatting levels or file options to the
different file types, as defined in their simple converters. A few saving
operations cannot be done with multiple converters. These are:
Saving OmniPage Documents
Use a workflow with two saving steps, or perform two separate saves.
Saving to two targets
For instance, you cannot use a multiple converter to save a document to
file and also send it in mail. Use a workflow with two saving steps, or
perform two separate saves.
Saving different page ranges
You cannot save different page ranges to different file types, because only
one set of selected pages can exist at saving time. For the same reason, a
single workflow cannot be used either. Perform two separate saves or use
two workflows.
OmniPage Pro offers a new export option. Turn recognized text into an audio
wave file for later listening, using ScanSoft RealSpeak. A multiple converter is
useful for this, allowing you to save the document to file and generate a wave file in
one saving step. You must specify the reading language in the converter options for
the wave file type.
Saving recognition results
Chapter 5
87