ScanSoft OMNIPAGE PRO 14 Manual page 32

32 Introduction
panel is not available if you requested display of your scanner's native
TWAIN interface when you set up your scanner. See "Setting up your
scanner with OmniPage Pro" on page 14.
Direct OCR
This feature provides OCR services directly from your favorite word
processor or similar application. Use this panel to register and unregister
applications for Direct OCR and to enable or disable this service. You can
also specify automatic or manual zoning and whether proofreading is
desired or not. See "How to set up Direct OCR" on page 44.
Process
Use this to define where new images should be placed in the document,
to request prompting for more pages when scanning, to specify two-page
scanning for handling books, and other settings.
Proofing
Use this to define whether proofreading should begin automatically after
recognition. Define also whether IntelliTrain should run, and use it to
load or work with a training file. See "Proofreading OCR results" on
page 65.
General
Change the interface language here. Enable an OmniPage icon on your
taskbar that will list your workflows for quick start processing. Enable
automatic detection of online updates and other settings.
Text Editor
Use this to show or hide some features in the Text Editor, to define the
unit of measurement to be used and to turn word wrapping on or off. See
"Text and image editing" on page 73.
Some settings have an effect only on future recognition. Examples are the
recognition languages, a training file or scanner brightness. These settings should
be correctly adjusted before you start processing. To have changes in these settings
applied to already recognized pages, you will have to re-recognize them. Other
settings are implemented immediately in all existing pages. Examples are Text
Editor settings like word wrap or measurement units.