Grade Lab - Cisco CCNA NETWORK SIMULATOR Manual

Grade Lab

In self paced learning software you don't have
people to guide you or to track your progress.
The Cisco CCNA Network Simulator comes
packaged with a Grade My Labs feature. After
you've configured your topology and you think
you've gotten all the requirements, go a head
and select the Grade Lab button on the main
screen.
Figure 5: Grade Lab button, disabled on the left
and when it's enabled on the right.
Figure 6: Grade My Labs
The Grade Lab button is not available until you start looking at the labs. It is fairly smart too as it will
select the current lab that you've loaded, or the current lab that you've selected. But say if you want to
select a different lab to grade? That's fine; you have a drop down list to use to select the labs. If you pass
there's nothing to worry about, but if you are missing some key points of interest then you'll be alerted to
the missing requirements.
You can also add your own custom labs to the Grade My Lab feature.
51
© 2004 Boson Software, Inc. All Rights Reserved.