Cisco CCNA NETWORK SIMULATOR Manual page 46

Product Home Page
Selecting this will load the Boson web page
download the latest revisions, check for updates; research the latest FAQ's, etc.
Submit Feedback
Selecting this feature will launch a web browser to boson.com's feedback page. If you have
feature requests or product suggestions, please enter them here. This service does not offer any
technical support, although Boson highly respects and values any and all feature requests, or other
suggestions for product enhancement that you submit.
Check for Updates
See the "Tools
section, for more information.
Getting Started Tutorial
Walkthrough of the 3 basic concepts required to completing a lab in the Cisco CCNA Network
Simulator, as further described in the "Basic Simulator Features" section of this document.
Telnet Setup Wizard
This Wizard will test and configure your default Telnet application, for use with the Cisco CCNA
Network Simulator.
Telnet Tutorial Wizard
This tutorial-wizard is fully scripted and automated, to walk you through many of the common
steps necessary for working in the Cisco CCNA Network Simulator with Telnet.
It will automatically guide you through the basic steps required for three things:
1. Basic operation of the Cisco CCNA Network Simulator,
2. Building your own emulated network,
3. Performing a simple practice lab.
Readme
A file listing any last-second errata, the required computer components, minimum and
recommended PC requirements, and the basics of getting started. This is in addition to the
Getting Started Guide.
© 2004 Boson Software, Inc. All Rights Reserved.
Check For Updates" documentation above, in the Tools pull-down menu
http://www.boson.com/netsim/cp where you can
41