Programmable Keys - Aastra 53I IP PHONE - RELEASE 2.1 User Manual

Programmable Keys

There are six function keys on the 53i phone, 4 of which are programmable, located
to the left of the paper label.
Save Key
Delete Key
Directory
Callers List
Transfer
Conference
Note: If a 536M Expansion Module(s) are attached to the phone, you can con-
figure 36 additional keys on each Expansion Module (Phone allows up
to 3 expansion modules totaling up to 108 additional softkeys). For more
information about expansion modules, see
Module"
You can use the Aastra Web UI only, to configure key functions. The following table
lists the functions you can set on the programmable keys and provides a description
for each function.
Key Function
None
Line
Speeddial
Do Not Disturb
Busy Lamp Field
(BLF)
BLF List
Auto Call
Distribution (ACD)
Directed Call
Pickup (DCP)/
Group Call Pickup
(GCP)
40 Model 53i IP Phone User Guide
on page 135.
Description
Indicates no setting for the key.
Indicates the key is configured for line use.
Indicates the key is configured for speeddial use. You can
also configure a prefix for a speeddial number.
Indicates the key is configured for "do not disturb" on the
phone.
Indicates the key is configured for Busy Lamp Field (BLF)
use. User can dial out on a BLF configured key.
(Maximum of 50 BLFs allowed on 536M Expansion
Module.)
Indicates the key is configured for BLF list use. User can
dial out on a BLF List configured key.
(For Sylantro Servers)
Indicates the key is configured to allow the Sylantro
server to distribute calls from a queue to registered IP
phone users (agents).
(For Sylantro Servers)
Indicates the key is configured to allow you to intercept -
or pickup - a call on a monitored extension(s).
Programmable
Keys
"Model 536M Expansion