Aastra 53I IP PHONE - RELEASE 2.1 User Manual page 59

Configuring a BLF List Key
Aastra Web UI
The BLF List function can be configured on the 53i using the Aastra Web UI only.
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation-
>Programmable Keys->Services. The BLF List URI is the name of the BLF list
defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user.
For example, my480i-blf-list@as.broadworks.com. The value of the BLF\List URI
parameter must match the list name configured. Otherwise, no values display on the
53i screen and the feature is disabled.
1. Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. Select a "Key 3" through "Key 6".
3. In the "Hard Key" field, select "BLF\List" (BroadSoft BroadWorks).
Note: The "Label" and "Value" field are not required. The BroadWorks BLF
List name is configured in the "BLF List URI" field instead.
4. In the "Line" field, select a line number that is actively registered to the appropri-
ate SIP proxy you are using. Valid values are Global (for all lines), or 1 through 9.
5. In the "BLF List URI" field, enter the name of the BLF list defined on the Broad-
Soft BroadWorks Busy Lamp field page for your particular user. For example,
my53i-blf-list@as.broadworks.com.
Note: Contact your System Administrator for the BLF List URI.
6. Click to save your changes.
Model 53i IP Phone User Guide 51