Snmp Details - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual

SNMP Details

Table 3-9 UDP Table Details (continued)
UDP Table
S.No Details
2. udpLocalPort
For example, sample output may include:
The SNMP details includes:
Table 3-10 SNMP Details
S.No SNMP Details
1. snmpInPkts
2. snmpOutPkts
3. snmpInBadVersions
4. snmpInBadCommunity
Names
5. snmpInBadCommunity
Uses
6. snmpInASNParseErrs
7. snmpInTooBigs
8. snmpInNoSuchNames
STRM SNMP Agent
Description
Specifies local port number for this UDP listener.
Description
Specifies the total number of SNMP messages
delivered to the SNMP entity from the transport
service.
Specifies the total number of SNMP messages that
were passed from the SNMP protocol entity to the
transport service.
Specifies the total number of SNMP messages that
were delivered to the SNMP protocol entity and
were for an unsupported SNMP version.
Specifies the total number of SNMP messages
delivered to the SNMP protocol entity that used a
SNMP community name not known to entity.
Specifies the total number of SNMP messages
delivered to the SNMP protocol entity that
represented an SNMP operation that was not
allowed by the SNMP community specified in the
message.
Specifies the total number of ASN.1 or BER errors
encountered by the SNMP protocol entity when
decoding received SNMP messages.
Specifies the total number of SNMP PDUs that were
delivered to the SNMP protocol entity and for which
the value of the error-status field is tooBig.
Specifies the total number of SNMP PDUs that were
delivered to the SNMP protocol entity and for which
the value of the error-status field is noSuchName.
SNMP Details 37