Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual page 48

46 U H -R
SING THE OST
Disk Storage
Details
-MIB
ESOURCES
Table 4-6 Printer Table Details (continued)
Printer Table
S.No Details
2. HR Printer
Detected Error
State
For example, sample output may include:
The disk storage details includes:
Table 4-7 Disk Storage Details
Disk Storage
S.No Details
1. HR Disk
Storage Access
Description
Specifies any error conditions detected by the printer. The
error conditions are encoded as bits in an octet string, with
the following definitions:
Condition Bit # hrDeviceStatus
lowPaper 0 warning(3)
noPaper 1 down(5)
lowToner 2 warning(3)
noToner 3 down(5)
doorOpen 4 down(5)
jammed 5 down(5)
offline 6 down(5)
serviceRequested 7 warning(3)
If multiple conditions are currently detected and the
hrDeviceStatus is unknown(1) or testing(4), the
hrDeviceStatus corresponds to the most severe state,
where down(5) is more severe than warning(3), which is
more severe than running(2).
Bits are numbered starting with the most significant bit of
the first byte of bit 0, the least significant bit of the first byte
being bit 7, the most significant bit of the second byte being
bit 8, and so on. A one bit encodes that the condition was
detected, while a zero bit encodes that the condition was
not detected. This object is useful for alerting an operator to
specific warning or error conditions that may occur,
especially those requiring human intervention.
Description
Specifies if this long-term storage device is readable and
writable or only readable. This should reflect the media type,
any write-protect mechanism, and any device configuration
that affects the entire device.
STRM SNMP Agent