Table of Contents
Advertisement
48
U
H
-R
SING THE
OST
File System Details
-MIB
ESOURCES
The file system table details includes:
Table 4-9 File System Table Details
Partition Table
S.No
Details
1.
HR File System
mount point
2.
HR File System
Remote mount
point
3.
HR File System
Type
4.
HR File System
Access
5.
HR File System
Bootable
6.
HR File System
Storage Index
7.
HR File System
Last Full Backup
Date
8.
HR File System
Last Partial
Backup Date
Description
Specifies path name of the root of this file system.
Specifies a description of the name and/or address of the
server that this file system is mounted from. This may also
include parameters such as the mount point on the remote
file system. If this is not a remote file system, this string
should have a length of zero.
Specifies the value of this object identifies the type of this
file system.
Specifies an indication if this file system is logically
configured by the operating system to be readable and
writable or only readable. This does not represent any local
access-control policy, except one that is applied to the file
system as a whole.
Specifies a flag indicating whether this file system is
bootable.
Specifies the index of the hrStorageEntry that represents
information about this file system. If there is no such
information available, this value is zero. The relevant
storage entry is useful for tracking the percent usage of this
file system and diagnosing errors that may occur when it
runs out of space.
Specifies the last date at which this complete file system
was copied to another storage device for backup. This
information is useful for ensuring that backups are being
performed regularly. If this information is not known, then
this variable shall have the value corresponding to January
1, year 0000, 00:00:00.0, which is encoded as (hex)00 00
01 01 00 00 00 00.
Specifies the last date at which a portion of this file system
was copied to another storage device for backup. This
information is useful for ensuring that backups are being
performed regularly. If this information is not known, then
this variable shall have the value corresponding to January
1, year 0000, 00:00:00.0, which is encoded as (hex)'00 00
01 01 00 00 00 00'.
STRM SNMP Agent
Advertisement
Table of Contents
Related Manuals for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
Related Products for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3