Table of Contents
Advertisement
Software Run
Details
For example, sample output may include:
The software run table details includes:
Table 4-10 Software Run Table Details
Software Run
S.No
Table Details
1.
HR Software OS
Index
2.
HR Software
Run Name
3.
HR Software
Run Id
4.
HR Software
Run Path
5.
HR Software
Run Parameters
6.
HR Software
Run Type
7.
HR Software
Run Status
STRM SNMP Agent
Description
Specifies the value of the hrSWRunIndex for the
hrSWRunEntry that represents the primary operating
system running on this host. This object is useful for
identifying that primary operating system.
Specifies a textual description of this running piece of
software, including the manufacturer, revision, and the
name by which it is commonly known. If this software was
installed locally, this should be the same string as used in
the corresponding hrSWInstalledName.
Specifies the product ID of the software.
Specifies a description of the location on long-term storage
(for example, a disk drive) from which this software was
loaded.
Specifies a description of the parameters supplied to this
software when it was initially loaded.
Specifies the type of this software.
Specifies the status of this running piece of software.
Setting this value to invalid(4) shall cause this software to
stop running and to be unloaded.
Software Run Details
49
Advertisement
Table of Contents
Related Manuals for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
Related Products for Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3