System Details - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual

26 U RFC1213-MIB
SING THE

System Details

For example, sample output may include:
The systems details includes:
Table 3-1 System Details
S.No System Details Description
1. SyDescr
2. SysObjectId
3. SysUpTime
4. SysContact
5. SysName
6. SysLocation
STRM SNMP Agent
Specifies a description of the entity. This value should
include the full name and version identification of the
system's hardware type, software operating-system, and
networking software. It is mandatory that this only contain
printable ASCII characters.
Specifies the vendor's authoritative identification of the
network management subsystem contained in the entity.
This value is allocated in the SMI enterprises subtree
(1.3.6.1.4.1) and provides information on the type of
system being managed. For example, if your company is
assigned the subtree 1.3.6.1.4.1.4242, you could assign
the identifier 1.3.6.1.4.1.4242.1.1 to router1.
Specifies the time, in hundredths of a second, since the
network management portion of the system re-initialized.
Specifies the contact information for the individual
responsible for this managed node.
Specifies the name assigned to this managed node. By
convention, this is the node's fully-qualified domain name.
Specifies the physical location of this node, for example,
the telephone closet, 3rd floor.