Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual page 36

34 U RFC1213-MIB
SING THE
Table 3-6 TCP Details (continued)
S.No TCP Table Details
4. tcpMaxConn
5. tcpActiveOpens
6. tcpPassiveOpens
7. tcpAttemptFails
8. tcpEstabResets
9. tcpCurrEstab
10. tcpInSegs
11. tcpOutSegs
12. tcpRetransSegs
13. tcpInErrs
14. tcpOutRsts
STRM SNMP Agent
Description
Specifies the limit on the total number of TCP
connections the entity can support. In entities where the
maximum number of connections is dynamic, set this
this object to value -1.
Specifies the number of times TCP connections have
made a direct transition to the SYN-SENT state from the
CLOSED state.
Specifies the number of times TCP connections have
made a direct transition to the SYN-RCVD state from the
LISTEN state.
Specifies the number of times TCP connections have
made a direct transition to the CLOSED state from either
the SYN-SENT state or the SYN-RCVD state, plus the
number of times TCP connections have made a direct
transition to the LISTEN state from the SYN-RCVD
state.
Specifies the number of times TCP connections have
made a direct transition to the CLOSED state from either
the ESTABLISHED state or the CLOSE-WAIT state.
Specifies the number of TCP connections for which the
current state is either ESTABLISHED or CLOSE-WAIT.
Specifies the total number of segments received,
including those received in error. This count includes
segments received on currently established
connections.
Specifies the total number of segments sent, including
those on current connections but excluding those
containing only retransmitted octets.
Specifies the total number of segments retransmitted,
the number of TCP segments transmitted containing one
or more previously transmitted octets
Specifies the total number of segments received in error,
for example, bad TCP checksums.
Specifies the number of TCP segments sent containing
the RST flag.