Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual page 41

Table 3-10 SNMP Details (continued)
S.No SNMP Details
21. snmpOutBadValues
22. snmpOutGenErrs
23. snmpOutGetRequests
24. snmpOutGetNexts
25. snmpOutSetRequests
26. snmpOutGetResponses Specifies the total number of SNMP Get-Response
27. snmpOutTraps
28. snmpEnableAuthen
Traps
STRM SNMP Agent
Description
Specifies the total number of SNMP PDUs that were
generated by the SNMP protocol entity and for
which the value of the error-status field is
badValue.
Specifies the total number of SNMP PDUs that were
generated by the SNMP protocol entity and for
which the value of the error-status field is genErr.
Specifies the total number of SNMP Get-Request
PDUs that have been generated by the SNMP
protocol entity.
Specifies the total number of SNMP Get-Next PDUs
that have been generated by the SNMP protocol
entity.
Specifies the total number of SNMP Set-Request
PDUs that have been generated by the SNMP
protocol entity.
PDUs that have been generated by the SNMP
protocol entity.
Specifies the total number of SNMP Trap PDUs that
have been generated by the SNMP protocol entity.
Specifies whether the SNMP agent process is
permitted to generate authentication-failure traps.
The value of this object overrides any configuration
information; as such, it provides a means whereby
all authentication-failure traps may be disabled. We
recommended that this object be stored in
non-volatile memory so that it remains constant
between re-initialization of the network management
system.
SNMP Details 39