Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual page 44

42 U H -R
SING THE OST
Storage Details
-MIB
ESOURCES
Table 4-1 System Details (continued)
S.No System Details Description
3. HR System
Initial Load
Device
4. HR System
Initial Load
Parameters
5. HR System Num
Users
6. HR System
Processes
7. HR System Max
Processes
For example, sample output may include:
The storage details includes:
Table 4-2 Storage Details
S.No Storage Details Description
1. HR Memory
Size
2. HR Storage
Type
3. HR Storage
Description
4. HR Storage
Allocation Units
Specifies the index of the hrDeviceEntry for the device from
which this host is configured to load its initial operating
system configuration.
Specifies the object containing the parameters (for example,
a pathname and parameter) supplied to the load device
when requesting the initial operating system configuration
from that device.
Specifies the number of user sessions for which this host is
storing state information. A session is a collection of
processes requiring a single act of user authentication and
possibly subject to collective job control.
Specifies the number of process contexts currently loaded
or running on this system.
Specifies the maximum number of process contexts this
system can support. If there is no fixed maximum, the value
should be zero. On systems that have a fixed maximum,
this object can help diagnose failures that occur when this
maximum is reached.
Specifies the amount of physical main memory contained by
the host.
Specifies the description of the type and instance of the
storage described by this entry.
Specifies the description of the type and instance of the
storage described by this entry.
Specifies the size, in bytes, of the data objects allocated
from this pool. If this entry is monitoring sectors, blocks,
buffers, or packets, for example, the value of this object is
greater than one. Otherwise, the value of this object is 1.
STRM SNMP Agent