Hayward OnCommand Operation Manual page 14

Set Day and Time Lights-all
Wednesday 10:37P 8:00P to 11:00P
or
Lights-wkend
8:00P to 11:00P
Lights-wkday
8:00P to 11:00P
or
Lights-CountDn
0:20
Aux1 and Aux2 configurations are identical.
Set Day and Time Aux1-all
Wednesday 10:37P 8:30A to 4:00P
or
Aux1-wkend
8:30A to 4:00P
Aux1-wkday
8:30A to 4:00P
or
Aux1-CountDn
0:20
Set Day and Time Valve3-all
Wednesday 10:37P 8:30A to 4:00P
or
Valve3-wkend
8:30A to 4:00P
Valve3-wkday
8:30A to 4:00P
Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
This menu will appear only if the Lights are configured for timeclock. The lights will turn on and off at
the designated times. The only override on this function is manual on/off control by the "Lights"
button.
Adjust time setting (Manual On/Off, 0:05, 0:10, 0:015...)
Move to previous/next menu item
This menu will appear only if the Lights are configured for countdown timer. This setting is the time
after you manually turn on the lights until the OnCommand automatically turns off the lights. You can
also manually turn off the lights at an earlier time by pressing the LIGHTS button. If the Lights relay
is on during the programmed off time, it may be because of freeze protection.
Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
This menu will appear only if the Aux1 is configured for timeclock. The Aux output will turn on and off
at the designated times. If the Aux relay is off during the programmed on time— note that some pool
equipment (example pressure side pool cleaner) can only be operated when the filter pump is running
and the pool/spa valves are in the pool-only position—the OnCommand will keep the relay off until
these other conditions are suitable for operation. If the Aux relay is on during the programmed off
time, it may be because of freeze protection. Also, manual operation overrides the timeclock.
Adjust time setting (Manual On/Off, 0:05, 0:10, 0:15...)
Move to previous/next menu item
This menu will appear only if the Aux1 is configured for countdown timer. This setting is the time after
you manually turn on the Aux relay until the OnCommand automatically turns off the relay. You can
also manually turn off the relay at an earlier time by pressing the AUX1 button.
Adjust time s Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
Adjust time setting
Move between start and stop times & to previous/next menu item
This menu will appear only if Valve3 is configured for timeclock. The valve will rotate on and off at the
designated times. There is no manual override. If the Valve3 relay is on during the programmed off
time, it may be because of freeze protection.
11