Rebooting - Juniper MEDIA FLOW CONTROLLER 2.0.4 Installation Manual

CHAPTER 2 Getting Started
test-vos-cl130 (config) # boot system next
test-vos-cl130 (config) # show image
Images available to be installed:
image-mfc-2.1.0-rc-1_11818_184.img
mfc-2.1.0-rc 1_11818_184
Installed images:
Partition 1:
mfc-2.0.2-rc 73_10732_170
Partition 2:
mfc-2.1.0-rc 1_11818_184
Last boot partition: 1
Next boot partition: 2
No boot manager password is set.
No image install currently in progress.
test-vos-cl130 (config) # reload
login as: admin
Juniper Networks Media Flow Controller
Last login: Fri Aug 13 22:56:40 2010 from 172.23.7.251
Juniper Networks Media Flow Controller
test-vos-cl130 > en
test-vos-cl130 # configure terminal
test-vos-cl130 (config) # show version
Copyright (c) 2008-2010 by Juniper Networks, Inc
Product name:
Product release:
Build ID:
Build date:
Target arch:
Built by:
Uptime:
Product model:
Host ID:
System memory:
Swap:
Number of CPUs:
CPU load averages: 2.41 / 1.10 / 0.44
test-vos-cl130 (config) #

Rebooting

You can either reboot or shut down the software; if you use shutdown, the system does not
reboot until it is power-cycled. To reboot using the CLI:
1. From Enable mode or Configure mode, reboot or shut down the system.
reload
22 Upgrading and Rebooting
Media Flow Controller and Media Flow Manager Installation Guide
mfc
mfc-2.1.0-rc
1_11818_184
2010-08-12 13:59:35
x86_64
build@build04
4m 42.860s
standard
44454C4C-8034-C6C04F443931
477 MB used / 1532 MB free / 2009 MB total
0 MB used / 1028 MB free / 1028 MB total
2
Copyright © 2010, Juniper Networks, Inc.