Displaying Redundant Sfm Hardware Information; Monitoring Redundant Sfm Status - Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Network Operation Manual

Displaying Redundant SFM Hardware Information

To display redundant SFM hardware information, use the following JUNOS software
Action
command-line interface (CLI) command:
For M40e routers:
Sample Output
user@host> show chassis hardware
Hardware inventory:
Item
Chassis
[...Output truncated...]
SFM 0 SPP
SFM 0 SPR
SFM 1 SPP
SFM 1 SPR
For M160 routers:
user@host> show chassis hardware
Item
Chassis
[...Output truncated...]
SFM 0 SPP
SFM 0 SPR
SFM 1 SPP
SFM 1 SPR
SFM 2 SPP
SFM 2 SPR
SFM 3 SPP
SFM 3 SPR
[...Output truncated...]
The command output displays the SFM slot number and SFM serial component
What it Means
(SPP and SPR) card names, and the SFM revision level, part number, serial number,
and description.

Monitoring Redundant SFM Status

To monitor the SFM status, follow these steps:
Steps To Take
1. Display the SFM Summary Status on page 582
2. Display the SFM LED Status at the Command Line on page 584
3. Check the SFM LED Status on the Faceplate on page 584
4. Display the SFM Environmental Status on page 585
user@host> show chassis hardware
Version Part number
REV 07 710-001228
REV 05 710-002189
REV 07 710-001228
REV 05 710-002189
Version Part number
REV 04 710-001228
REV 01 710-001224
REV 04 710-001228
REV 02 710-001224
REV 06 710-001228
REV 04 710-001228
REV 01 710-001224
Chapter 44: Monitoring Redundant SFMs
Serial number Description
M40e
AF2247
AF1847 Internet Processor II
BE0175
BE0201 Internet Processor II
Serial number Description
20079 M160
AA2860
AB0139 Internet Processor I
AA2859
AA9861 Internet Processor I
AB3082
AA1998
AB0137 Internet Processor I
Displaying Redundant SFM Hardware Information
!
581