Table of Contents
Advertisement
JUNOS Internet Software Network Operations Guide: Hardware
What It Means
Step 2: Locate the MCS Serial Number ID Label
Action
Returning the MCS
Action
!
368
Returning the MCS
The command output displays the MCS slot number, revision level, part number,
and serial number. Give this information to the Juniper Networks Technical
Assistance Center (JTAC) if the MCS fails.
To locate the MCS serial number ID label, look on the bottom left side of the board,
as shown in Figure 152.
Figure 152: MCS Serial Number ID Label
Serial number ID label
AA1234
To return the MCS, see "Replacing a Failed Component" on page 122, or the
procedure to return a field-replaceable unit in the M40e or M160 router hardware
guide.
Advertisement
Chapters
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Juniper JUNOS - NETWORK OPERATION GUIDE REV1
Related Products for Juniper JUNOS - NETWORK OPERATION GUIDE REV1
- Juniper NETWORKS STRM - TECHNICAL NOTE REV 6-2008
- Juniper JUNOSE 11.1.0 - REV 4-29-2010
- Juniper MEDIA FLOW CONTROLLER 2.0.5 - S REV 15-11-2010
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 MODULE GUIDE REV 01-10-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 HARDWARE GUIDE REV 9-29-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010
Need help?
Do you have a question about the JUNOS - NETWORK OPERATION GUIDE REV1 and is the answer not in the manual?