Returning An Mcs - Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Network Operation Manual

10. Press the extractor clips on the left and right sides of the MCS inward.
11. Verify that the green LED labeled OK on the MCS faceplate is lit. Also check the
12. Verify correct MCS functioning by using the show chassis environment mcs
If the replacement MCS works, you can be certain that the replaced MCS failed. To
return the MCS, see "Returning an MCS" on page 575.

Returning an MCS

To return an MCS, see "Return the Failed Component" on page 86, or the procedure
Action
to return a field-replaceable unit in the M40e or M160 router hardware guide.
host module LEDs on the craft interface to verify that the green LED labeled
is lit for the host module to which the MCS belongs.
ONLINE
command.
Chapter 43: Monitoring Redundant MCSs
Returning an MCS
!
575