Using The Devices Page To Remove Bundles From Devices - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

20.10.2 Using the Devices Page to Remove Bundles from
Devices
1 In the ZENworks Control Center, click the Devices tab, then click the Servers link to display a
list of servers or server groups in your ZENworks Linux Management system.
or
In the ZENworks Control Center, click the Devices tab, then click the Workstations link to
display a list of workstations and workstation groups in your ZENworks Linux Management
system.
2 Click the underlined link for the server, server group, workstation, or workstation group that
you want to remove a bundle from.
If you clicked a server or workstation group, skip to
3 In the Effective Bundles section on the Summary page, click Advanced to display all bundles
assigned to this device.
4 Select the box next to the desired bundle, then click Remove to launch the Uninstall Bundle
Wizard.
5 Specify a removal option:
No: Although the device is removed from the Assignments section and the bundle is no
longer assigned to the device, the software remains installed on previously assigned
devices.
Yes: The software is uninstalled from previously assigned devices according to the
schedule you specify in the next step of this wizard.
6 Click Next to display the Schedule page.
7 Select a schedule type from the drop-down list.
The settings you configure on this page determine when the assignments are removed from
previously assigned devices.
The following schedules are available. Click the link in the left column for more information
about each schedule type.
248 Novell ZENworks 7.2 Linux Management Administration Guide
Step 4.