Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 294

Configuration Element
User
Password
Step 2: Catalog and Bundle Configuration
You must provide details about the catalogs and bundles you want mirrored to your server.
Before you mirror the catalogs and bundles to your server, you can view the available catalogs and
bundles on the remote server.
To view the available catalogs, run the following command:
zlmmirror slc -c filename.xml
To view the available bundles, run the following command:
zlmmirror slb -c filename.xml
CatalogConf
Each catalog you want to mirror must have a separate CatalogConf section:
<CatalogConf>
<Name>Red Carpet 2</Name>
<LocalName>Red Carpet 2</LocalName>
<Target>sles-9-i586</Target>
<Package>lib.*</Package>
</CatalogConf>
Configuration Element
Name
Local Name
Folder
294 Novell ZENworks 7.2 Linux Management Administration Guide
Description
Name to use when connecting to your ZENworks Linux Management (local)
server. The Administrator user should be specified if you want to use the
default administrator account.
Password for the account provided in User. If you are using the Administrator
account, this is the password you specified during the server installation. For
information about encoding your password,
ZENworks Server Password," on page 312
Description
Name of the catalog you want to mirror from this remote server.
This is the only required parameter.
Name of the catalog you want the mirrored software placed in. If no Local
Name is specified, the catalog name from the remote server is used. The local
name for the catalog should not be same as that reserved for the
<catalogname>-patches folder
Specifies the eDirectory TM
bundles and catalogs are created and updated. If not specified, the catalogs
and bundles are created and updated in the /zlmmirror folder.
seeSection 25.8, "Encoding the
folder (for example, /folder1/folder2) where