Seat Memory - Audi A4 Owner's Manual

document_0900452a81b1b9de.book Seite 75 Donnerstag, 26. Juli 2007 9:16 09
Adjusting contour of lumbar support
– Press the front or rear of switch
decrease the curvature of the lumbar support as
required.
Adjusting height of lumbar support
– Press the top or bottom of adjuster switch
lumbar support upwards or downwards as required.
Moving seat backwards or forwards
A ⇒ page 74, fig. 76 forwards or back-
– Press switch
B
wards.
Adjusting seat height
A
– Press switch up or down.
B
Raising/lowering seat at front
A
– Press the front of switch
B
Raising/lowering seat at rear
A
– Press the rear of switch
B
Adjusting backrest angle
A
– Press switch forwards or backwards.
C
Extending or shortening the thigh support*
A
– Lift the control below the seat cushion. The front seat
D
cushion will spring forward.
– Slide the seat cushion back to the normal position after
each use.
Controls
A
to increase or
A
could lead to an accident.
off and when the key is not in the ignition. To avoid accidental inju-
ries, never leave children unattended in the vehicle.
A
to move the
A
trolled use of the height adjustment can cause injuries.
far as otherwise the seat belt and airbag could fail to restrain the
wearer properly in an accident, possibly leading to injury.

Seat memory

Memory for driver's seat
You can use the recall buttons in the driver's door to store
up or down.
and recall the seat adjustments for two drivers.
up or down.
As well as the driver's seat position, the seat memory will store and
recall the exterior mirror settings (if the vehicle is equipped accord-
ingly):
Safety Driving tips General maintenance
Seats and storage
WARNING
Never adjust the driver's seat when the vehicle is moving - this
The electrical seat adjustment also works when the ignition is
Be careful when adjusting the seat height. Careless or uncon-
Do not drive with the backrests of the front seats reclined too
Self-help
75
Fig. 77 Driver's door:
Seat memory
Technical data