Audi A4 Owner's Manual page 74

document_0900452a81b1b9de.book Seite 72 Donnerstag, 26. Juli 2007 9:16 09
72 Lights and vision
Applies to vehicles: with digital compass
Setting the correct compass calibration zone
The correct compass calibration zone must first be set
before the compass can give an accurate reading.
Fig. 74 Map of compass calibration zones
A ⇒ page 71, fig. 73 until the
– Press and hold button
A
currently set zone number is displayed on the interior
mirror.
A
– Press button repeatedly until the correct zone number
A
appears. The adjustment mode will be ended automati-
cally after a few seconds.
Applies to vehicles: with digital compass
Calibrating compass
The compass must be re-calibrated if the display is incor-
rect or inaccurate.
A
– Press and hold button until the letter C appears in the
A
interior mirror.
– Drive in a circle at a speed of about 10 km/h until a point
of the compass is displayed in the interior mirror.
WARNING
Calibrate your compass at a location where there is no traffic so
that you do not endanger yourself or other road users (accident
risk).