Audi A4 Owner's Manual page 114

document_0900452a81b1b9de.book Seite 112 Donnerstag, 26. Juli 2007 9:16 09
112 Heating and cooling
Setting the timers
– Select: Function selector button
AC > e.g. Timer 1 ⇒ page 111, fig. 122.
Activating a timer
– Select: Function selector button
AC > Timer status ⇒ fig. 123.
Three timers are available for the auxiliary heating/ventilation. You
can set a starting time and running time for each of the timers.
When the time set on one of the timers elapses, the date automati-
cally changes to the next day and the Timer status is reset to off. You
have to activate one of the timers (e.g. T1 on) before it will switch on
the auxiliary heating/ventilation at the time you have set. This
prevents the auxiliary heating/ventilation from switching on when
you are not using your vehicle.
Note
Before activating the timer, make sure that the correct time and date
settings have been entered. If the time and/or date are not correct,
the auxiliary heating will come on late or not at all. Please refer to
the MMI Operating Instructions for information on how to set the
date and time.
Applies to vehicles: with auxiliary heating - under development at the time of printing
Setting the running time
You can set the running time on the sound system or
MMI*.
Fig. 123 Display: Timer
status
> control button
CAR
– Select: Function selector button
CAR > control button
AC > Running time.
The running time for the auxiliary heating/ventilation can be set to
a time between 15 and 60 minutes. The auxiliary heating/ventilation
will switch itself off at the end of the programmed running time.
Fig. 124 Display:
Running time
> control button
CAR