Table of Contents
Advertisement
Updated October 31, 2007
(2.44 in.)
Figure 77. Pedestal mounting template
2. Place the pedestal so that the receiving bolts align with the screw holes in the
3. Use the enclosed M6 screws to secure the pedestal to the counter as shown in
4. Route the video and power cables down through the pedestal.
5. Attach the cable to the appropriate ports in the system unit.
62 mm
35 mm
(1.37 in.)
Note: To route cables through the counter, drill two 7/8-in. holes through the
counter. Trim the remaining material between the holes with a small saw
or chisel.
counter.
Figure 76 on page 78. The slots located in the metal support bracket allow you
to position the pedestal for maximum stability.
8 mm (0.31 in.)
diameter
22 mm (0.87 in.)
diameter
20 mm
(0.80 in.)
Chapter 4. Installing external options
79
Advertisement
Table of Contents
