Placing The Post Into The Filler Hole - IBM 4800-741 Planning, Installation, And Operation Manual

Figure 66. Placing the post into the filler hole
6. Fit the post into the hole on the filler. See Figure 66.
7. Connect the other end of the character/graphics display cable to any green
70
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
(12-volt) powered-USB port on the rear of the system unit. Or, connect the other
end of the character/graphics display cable to the number 4, RS-485 port on the
rear of the system unit.
Updated October 31, 2007
1