Removing The Blank For The Ups Switch Panel - IBM 4800-741 Planning, Installation, And Operation Manual

5. If a CD-ROM is installed, remove the CD-ROM blank ( B in Figure 27 on page
Figure 28. Removing the blank for the UPS switch panel
6. If you installed an UPS in your wide unit, remove the UPS switch panel blank
36
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
35) by pressing on the tabs from the rear. Discard the blank.
(see U in Figure 28).
Updated October 31, 2007
U