Installing the 40-character VFD
Use this procedure to install a 40-character VFD.
Note: The yoke for a two-sided display is taller than the yoke for a single-sided
1. Connect the yoke A in Figure 59 to post B . If required, add the extension
Figure 59. Assemble the post
2. Route the display cable through the post (see Figure 60.)
Figure 60. Routing the cable
66
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
display. The installation procedure is the same for both.
post C between A and B .
A
C
B
Updated October 31, 2007