Table of Contents
Advertisement
Updated October 31, 2007
For any other questions regarding the printer, refer to the IBM SureMark Printers:
User's Guide.
Installing the 40-character LCD
Figure 54. Assemble the post
Figure 55. Slide display into holder
A
B
C
D
1. Route the display cable up through the head assembly ( B in Figure 54) and
out the opening on the side. Then route the cable down through the post D
and optional extension C .
2. Snap the head assembly onto the post.
3. See Figure 55. Slide the display up into its holder until it latches securely in
place.
Note: Depending on the direction you want the display to face, the holder can
be attached two different ways.
Chapter 4. Installing external options
63
Advertisement
Table of Contents
