Installing a vertical stand
Follow these instructions to install your system onto a vertical stand.
1. Place the vertical stand in the location where the system unit will operate.
Figure 88. Placing the system unit on the vertical stand
2. Position the system unit on the vertical stand as shown in Figure 88. The power
3. Insert the front foot ( A ) of the system unit into the notch ( B ) in the stand.
86
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
B
buttons should be located closer to the stand with the air vents on top and
unobstructed.
Updated October 31, 2007
A